NAME

mixer — manipulate soundcard mixer controls

SYNOPSIS

DESCRIPTION

The mixer utility is used to set and display soundcard mixer device controls.

The options are as follows:

-a

Print the values for all mixer devices available in the system (see FILES).

-d pcmN | N

Change the default audio card to pcmN, where N is the unit number (e.g for pcm0, the unit number is 0). See EXAMPLES on how to list all available audio devices in the system.

There is also the possibility of hot-swapping to the new default device if virtual_oss(8) exists in the system and is running, in which case the -V option needs to be specified as well.

Hot-swapping generally cannot happen with plain sound(4), so the user has to restart the track in order to get sound coming out of the new default device. This is because applications usually open a device at the start of the track and do not check for default device changes, in order to open the new device mid-track. virtual_oss(8), on the other hand, can do hot-swapping, because it creates a virtual device for applications to open, and then does all the necessary routing and conversions to the appropriate device(s).

Note that hot-swapping will work only for applications that are using virtual_oss(8) devices, and not plain sound(4) ones.

-f device

Open device as the mixer device (see FILES).

-h

Print a help message.

-o

Print mixer values in a format suitable for use inside scripts. The mixer's header (name, audio card name, ...) will not be printed.

-s

Print only the recording source(s) of the mixer device.

-V voss_device:mode

Specify a virtual_oss(8) control device, as well as a mode (see below), in order to hot-swap devices. This option is meant to only be used in combination with the -d option.

The available modes are as follows:

Mode	Action
all	Playback and recording
play	Playback
rec	Recording

The mode part is needed, so that mixer will not accidentally hot-swap both the recording and playback device in virtual_oss(8), if only one direction is to be hot-swapped.

See EXAMPLES on how to use this option.

The list of mixer devices that may be modified are:

Not all mixer devices are available.

Without any arguments, mixer displays all information for each one of the mixer's supported devices to stdout. If the dev argument is specified, mixer displays only the values for dev. More than one device may be specified.

Commands use the following format:

The available controls are as follows (replace dev with one of the available devices):

The dev.volume control modifies a device's volume. The optional lvol and/or rvol values have to be specified. The values should typically be decimal numbers between 0 and 1 with at most 2 digits after the decimal point. A trailing percent sign indicates that the value should be treated as a percentage of 1.0, rather than an absolute value. Thus, 70% means the same as 0.7. If the left or right volume values are prefixed with + or -, the value following will be used as a relative adjustment, modifying the current settings by the amount specified. Note that relative percentages are still relative to 1.0, not to the current value. If the volume is currently 0.40 and an adjustment of +20% is specified, then thet final volume will be set to 0.60.

Volume can also be set using the shorthand dev=value. This syntax does not apply to other controls.

The dev.mute control (un)mutes a device. The following values are available:

The dev.recsrc control modifies the recording sources of a mixer. mixer marks devices which can be used as a recording source with rec. Recording sources are marked with src. To modify the recording source you can use one of the following modifiers on a rec device:

FILES

/dev/mixerN

The mixer device, where N is the number of that device, for example /dev/mixer0. PCM cards and mixers have a 1:1 relationship, which means that /dev/mixer0 is the mixer for /dev/pcm0 and so on. By default, mixer prints both the audio card's number and the mixer associated with it in the form of pcmN:mixer. The /dev/mixer file, although it does not exist in the filesystem, points to the default mixer device and is the file mixer opens when the -f device option has not been specified.

EXAMPLES

List all available audio devices in the system:

$ mixer -a | grep ^pcm

Increase the vol device's volume by 5%:

$ mixer vol=+5%

Change the volume for the vol device of the /dev/mixer0 mixer device to 0.65:

$ mixer -f /dev/mixer0 vol.volume=0.65

Increase the mic device's left volume by 0.10 and decrease the right volume by 0.05:

$ mixer mic.volume=+0.10:-0.05

Toggle the mute for vol:

$ mixer vol.mute=toggle

Add mic and remove line from the recording devices:

$ mixer mic.recsrc=add line.recsrc=remove

Dump /dev/mixer0 information to a file and retrieve back later:

$ mixer -f /dev/mixer0 -o > info
...
$ mixer -f /dev/mixer0 `cat info`

Suppose virtual_oss(8) is running with /dev/vdsp.ctl as its control device, and pcm0 as the playback device. Change the default device to pcm1, and hot-swap to it for both recording and playback in virtual_oss(8):

$ mixer -d pcm1 -V /dev/vdsp.ctl:all

SEE ALSO

mixer(3), sound(4), sysctl(8), virtual_oss(8)

HISTORY

The mixer utility first appeared in FreeBSD 2.0.5 and was rewritten completely in FreeBSD 14.0.

AUTHORS

Christos Margiolis <christos@FreeBSD.org>